We offer a full range of Accessories to meet your requirements where others many not be able to.
The Shoulder Harnesses have been designed to distribute pressure evenly over different parts of the chest and shoulders.
The Dynamic Harnesses have been designed to provide support and stability to the upper trunk area of a user in a wheelchair.
The Sternum Harnesses have contoured pads that offer greater support, they are made from Nylon Neoprene with bound edges.
The Slimline Harnesses have been designed to be shaped to give better flexibility in client fitting with Nylon covered neoprene with bound edges.
Made to allow a correct fitment of shoulder straps on a harness to wheelchairs or seat units where no attachment points are available.
Plastic Buckle Belts available in either Dual Pull or Rear Pull configurations, and in three different sizes - small, medium or large.
NEW - Heavy Duty Plastic Buckle Belts available in either Two Point or Four Point anchors, and in 2 different sizes - medium & large.
Anti Tamper buckle side pull belts available in two or four point configurations, and in two different sizes - small or large.
Metal Buckle belts available in three sizes and either two point or four point configurations.
The Soloc belts have been designed for those with the use of one hand. The design allows the belt to be connected and released without assistance.
The Type A Headrest is a curved head support providing medium to good head positioning, while still being comfortable for the user.
The Type D Headrest is a shaped headrest which provides good comfort while still being able to produce minimal positioning.
The Type E Headrest is a contoured combination of head and neck rest giving high levels of comfort and support for the user.
The Type J Headrest is a slightly curved oblong headrest offering a basic level of support, while still being comfortable for the user.
The Type K Headrest is a cross-shaped neck and headrest support which offers high levels of positioning and support.
The contours of the versatile Type G Headrest can be adjusted to meet the changing needs of a user.
This Headband can be easily attached to the Type G Headrest using hook and loop - it is available in two different sizes.
The Headrest Mount allows the fitment to a bracket shell or channel back system and is suitable for 13mm and 16mm headrest stems.
Our range of Padded Chest Straps come in four sizes with two fastening options, all adjustable to obtain a precise fit for the user.
The NXT Xtend Back Support is extremely versatile allowing the posture of the users to be targeted for proper support of the thoracic region.
The NXT Xtend Low Back Support has an adjustable height range from 13" to 17" - a great compliment to the standard Xtend model.
The NXT Armadillo Back Support is a multi-adjustable postural back with a three-section modular shell with back cushion.
A Tension Adjustable Backrest is designed to replace a standard sling back - they are made to order, perfectly matching the wheelchair.
The Oxygen Cylinder Carriers are suitable for most wheelchairs and come in a non-tilt version and a tilt version.
Designed by RMS, the innovative Lock and Latch System enables our Drop-in Seats to be quickly attached to most wheelchair frames.
A Drop in Seat allows for the fitting of positioning accessories such as the Pommel, whereas cloth seating cannot.
Pommel supports from RMS will separate the knees of a wheelchair occupant when there is a tendency to bring them together.
The Bexhill Arm Supports come in only one size (550mm Wide x 320mm Deep) and they are made from rigid black plastic with a raised lip.
The Universal Control Mount is a fully adjustable control mounting bracket which suits most types of control joysticks - in a chrome finish.
The Channel armrest is supplied to replace conventional pads for when greater functional support is required.
The Thigh Straps hold each inner thigh providing resistance to pelvic obliquity and rotation - sold in pairs complete with fitting kit.
The RMS Knee Adductors are designed to help position the users legs when seated in a wheelchair - they swing away making it easier to transfer.
The Clamp on Lateral Supports can be mounted onto 22mm and 25mm backrest frames - fitted as individual supports or as a pair.
A discrete method of securing feet, available in five sizes with two types of strap closure, hook & loop, or side release plastic buckle.
The One-Piece Clip-on Footboard is made from 12mm of polypropylene with depth adjustment and comes with turn lock anti-tip fixing.
The Comfort Beadbags are made to the size you require, designed for comfort and ideal for users who do not wish to wear any footwear.
These new Foot Caps made by Ottobock provide a greater level of security for the user’s feet while in their wheelchair or seating unit.
Made from 12mm polypropylene with a textured surface - supplied with adjustable mountings to accept different stems.
The Raiser Blocks are for adjusting footrests to different heights - they are supplied in pairs and come with clamping screws.
The One-piece padded foot straps come a with cam buckle and are made with a durable neoprene pad for maximum user comfort.
Individual Footboards are supplied in pairs complete with multi-fixings that enable depth adjustment made from 12mm of polypropylene.
The Rochester Stumpboard is a strong and versatile product offering adjustment in height, width, and depth to better suit the user.
The Contoured Trays are manufactured from 6mm of clear plastic. Available with three mounting options and three different sizes.
The Contoured Tray Comfort Pad sits on the front of the Contour Tray, creating a softer more comfortable area for the user.
The Ormesa Bug Rain cover- perfect for rainy days.
The Bug Sun Canopy - perfect for shielding the sun.
A limited time offer - get both the Bug Rain Cover and the Sun Canopy in a bundle for just £99.00!
The Bug Thermal Cover - keep warm in colder times.
The My-Lyte Discovery Sun Canopy - perfect for shielding the sun.
The My-Lyte Discovery Rain Cover - perfect for rainy days.
The Clip Rain Cover - perfect for rainy days.
Keep warm with the Clip Thermal Cover.
The Clip retractable Canopy - perfect for shielding the sun.
The Marley Rain Cover - perfect for rainy days.
The Marley Sun Canopy - perfect for shielding the sun.
The Piper Comfort Rain Cover - perfect for rainy days.
Keep warm with the Piper Comfort Footmuffs.
The Piper Comfort Canopy - perfect for shielding the sun.
Corzo Xcountry Canopy - perfect for shielding the sun.
The Corzino Xcountry Rain Cover - perfect for rainy days.
Keep warm with the Corzo Xcountry Footmuffs.
The Corzino Basic Rain Cover - perfect for rainy days.
The Cruiser Rain Cover requires the regular Canopy to be fitted.
The Cruiser Canopy - perfect for shielding the sun.
The Cruiser Extended Canopy - perfect for shielding the sun.
Quick release Mounting brackets are designed to fit directly onto the wheelchair backrest frame or onto the wheelchair backrest.
A firm foot support with a sandwich construction of a different density foams to absorb the pressure during extension.